[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Installed new parts, car runs like shit



>From my experience, 2.3's are VERY picky about plug wires, and plug gap.
If you are experiencing a high rpm, high boost miss it could be either a
plug or wire issue. First check the gap, if it's .035 or so then try
wires.

I have had _nothing_ but GOOD luck with the Motorcraft stuff. Stick with
the AWSF32C's and stock replacement wires. These wires by the way,
although only 8mm OD, had a much bigger core than the 10mm OD Accel wires
my buddy just put on his Mustang. This is a no brainer....

aftermarket parts  <>  better than stock parts
               (not equal)

Stick with what you know works...

Cory
ericksco@mhd1.moorhead.msus.edu