[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Svo] Boost Solenoid {5}



SO what is the correct way to install a bleeder valve.  On my car (87 XR),
it had a hose from the pressurized side of the turbo to the wastegate and
the boost solenoid connecting from the pres. side of the turbo to the input
side of the turbo.

I have done it two ways

1) put a hose in place of the solenoid effectively connecting the pres. side
to the input. Connected a bleeder T from the pres. side to the wastegate and
vented to the atmosphere.

2)capped off the pres. side where the boost solenoid was. Connected the
outlet of the bleeder T to the input side of the turbo, with the bleeder the
same as above.

Is there another way or is #2 above the best. (well cheapest).

Ric-