[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

SVO: Re: RE: Rear Caliper Rebuild



Nope that's for the front calipers. rears are pretty steep, I think.


Dave
Home Page:  http://www.SmartWorx.com/Dcompton
Subscriptions to SVO and TC Listservers: 
http://www.SmartWorx.com/Listservers
Turbo Tek Toys  http://www.SmartWorx.com/TurboTekToys


----------
> From: Mike Ray <Mike.Ray@skycell.com>
> To: Multiple recipients of list SVO <SVO@SMARTWORX.COM>
> Subject: SVO:  RE: Rear Caliper Rebuild
> Date: Monday, November 03, 1997 9:01 PM
> 
> From what folks here on the coast say, about 14$ a piece for rebuilt
> units. If your time is worth $20/hr (a conservative estimate for you
> software folks) you're over budget buy the time you get the old units on
> the bench. 
> 
> Mike
> 
> 
> > -----Original Message-----
> > From:	Rod Lilak [SMTP:rkl@MooseWare.com]
> > Sent:	Monday, November 03, 1997 8:34 PM
> > To:	Multiple recipients of list SVO
> > Subject:	SVO:  Rear Caliper Rebuild
> > 
> > 
> > In my fall PM I determined that one of the rear calipers isn't holding
> > firmly
> > when the emergency brake is applied. 
> > 
> > When I look back on when I did the rear brakes it is quite possible
> > that I
> > made the
> > mistake of not bringing the adjustment in less the 3/32" before
> > applying the 
> > brakes and the self-adjuster may be pulled out.
> > 
> > I've got the factory manuals and the caliper refurb doesn't look all
> > that bad - 
> > but I'm not sure about finding the parts. Does anyone have any
> > recommendations
> > for shops that do rebuilds ?
> > 
> > Rod
> > ----------------------------------------------------------------
> > Rod Lilak		|  MooseWare Personal Computer Solutions
> > Voice (719) 685-9174    |  Custom Software for Vertical  Markets
> >                         |
> > ================================================================
> > It's not just Software - It's MOOSEWARE !
> > ----------------------------------------------------------------