[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: SVO: Noise from FMS roller or something.

First off get that camshaft out of your motor. That camshaft was not made for
a turbo motor. The stock 85/.5 or 86 SVO camshaft will give you much better
power. If you do not still have it then get the Engel from Dave. If you want
to stay with a roller, we have the only street roller and it has proven to be
the best.

You may have the clacking noise because the tip height is off. You need to
check the tip height in you motor. You may need lash caps or longer lifters.
If the tip height is right then you need to check the valve spring installed
height and seat pressure. If this is good check oil pressure. Good luck