[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

SVO: Re: *sigh*

On Sat, 20 Dec 1997, Fred Kuzyk wrote:

> Scott,
> The studs are unavailable from Ford. Try a Fastener specialist. I use a
> M12 stud, 55mm in total length, pitch is 1.75 mm. use a matching M12
> metric nut. Unusual that the stud would fall out. I've found that you
> have to use a stud removal tool to get these rusty buggers out!
> Cheers!
> Fred Kuzyk

I was unclear.  I lost a nut(hih hih..I said nut)
I was askin the stud thread size so I could get a new nut.

		The Pinto Page:  www.eng.usf.edu/~shidel

**Join the turbo 2.3 mailing list by sending your subscription request to:

-71 Pinto, stock 2.3 turbo, 13.67@98, radials
	8.1@85 1/8th mile on slicks
	Big intercooler ON!
	T4 Compressor soon to be on!

-85 Merkur, let the modding begin!