[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

SVO: Re: *sigh*

The studs are unavailable from Ford. Try a Fastener specialist. I use a
M12 stud, 55mm in total length, pitch is 1.75 mm. use a matching M12
metric nut. Unusual that the stud would fall out. I've found that you
have to use a stud removal tool to get these rusty buggers out!

Fred Kuzyk

Scott Shidel... wrote:
> is there anyone out there that has a book or something tht lists the
> thread size/pitch of the studs on theelbow for the downpipe?  One seems to
> have fallen off the Merk, and I was driving around all day lookin for a
> nit to replace it(had to take off the other sdo I could match it up, too).
> -----------------------------------------------------------------------
>                 The Pinto Page:  www.eng.usf.edu/~shidel
> **Join the turbo 2.3 mailing list by sending your subscription request to:
>         ericksco@mhd1.moorhead.msus.edu
> Scott
> -71 Pinto, stock 2.3 turbo, 13.67@98, radials
>         8.1@85 1/8th mile on slicks
>         Big intercooler ON!
>         T4 Compressor soon to be on!
> -85 Merkur, let the modding begin!
> ------------------------------------------------------------------------